Piezo Syteme Jena

digital piezo controller d-Drive®

d-Drive® is the new generation of digital piezo controller from piezosystem jena. The new d-Drive® line in the program of piezo nano-controllers from piezojena combines the highest positioning accuracy with a unique handling comfort.
This means that all features can be controlled by a PC and the main functions can be directly handled with the front panel too.
Moreover, the actuators are now with AUTOMATIC SENSOR IDENTIFICATION - ASI Function separable and exchangeable .

The system always consists of the 19"-casing with a wide range of power module of 110V up to 230V, the EDS modules, with and without QVGA Display, and a variation number of EVD50, low voltage amplifier modules for open and closed loop actuators.
Per controller up to 6 actuators can be controlled simultaneously. piezosystem jena also implemented adjustable features such as slew rate, notch filter frequency and pass filters frequencies.
A built-in function generator offers sine, triangular and square functions as well as noise and sweep.

All this makes the d-Drive® an excellent choice for nanopositioning and scanning applications including scanning microscopy, metrology, surface profiling, cell tracking, nanotechnology and many other applications.

Key features and USP:

• 20bit resolution
• sampling rate 50kSPS
• 19"-casing technology, width 84TE
• PC interface
• QVGA Display
• up to 6 channel per system
• self calibration after actuator plug in
• open / closed loop modus changeable
• free exchangeability of each digital closed loop actuator - ASI Function
  
• integrated wave generator (sinus, rectangular, triangle)
  
• notch filter as a selective filter
• low- and high pass filter
• slew rate programming
• generator for noise and wobble functions
• free programmable
• memory function for own values
• position value given in volt or micron
• user software for WINDOWS

Technical Information about resolution and capacity of the piezo amplifier are provided on the data sheet EVD50. For more detailed information about the d-Drive system please see the data sheet d-Drive.

The USP of our new digital controller system is the separate exchangeability of closed loop actuators (ASI Function), thanks to an integrated ID-information. The actuator type, linearity optimization and PID-settings are stored on an ID-chip in the actuator´s plug. The calibration is done with an integrated pre-amplifier.

Download:
manual d-Drive