- 20 µm adjustment range
- sub-nm resolution
- very compact design
- parallelogram construction
- high resonant frequency
- easy to fix on microscopes by Flex-Adapter
The actuators of the series MIPOS were developed for fine adjustment of microscope objectives and object lenses. The maximum motion is 20 µm. The resolution of MIPOS 20 is very high and, in practice, only limited by the voltage noise of the power supply.
A special integrated pre-load design results in the following advantages:
- very small angular deviation
- highly parallel large range of motion
- high resonant frequency
On the top and bottom side of the series MIPOS all standard threads for Zeiss, Leica, Nikon, Olympus etc. available.
Mounting this system on the microscope is very easy - screw the Flex-Adapter thread-ring into the microscope and mount the MIPOS on this ring with a clamping-screw. Because of the small size, no other threads beside the MIPOS are blocked.
To avoid drift and hysteresis, the MIPOS elements are also available with an integrated strain gauge measurement system "SG".
recommended controller for MIPOS 20.....
