- 3-axis positioning system with permanent active tilt error compensation
- motion up to 220µm in X and Y and 30µm in Z
- free centre space 50x50mm
- integrated feed back measurement system
- integrated preload design for scanning application
- stage cable connection by D-Sub connector
application examples:
- scanning microscopy
- nano positioning, lithography
- laser tuning, fiber optics
- cell tracking
- AFM, SNOM, RAMAN microscopy
The TRITOR 200/20 is specially designed for microscopy applications. The central clear aperture of 50mm x 50mm guarantees a flexible inset for all kind of microscope stages. Samples can be mounted easily by using the M4 thread holes in the top plate. A high stability and accuracy based on the high resonant frequency is a major advantage of the TRITOR 200/20 stage. Internal lever transmission allows a total stroke of 220 microns in the x and y axes, and the direct-piezo-drive for the z-axis provides a total z-motion of 30 microns. This principle provides ultra-high resolution and remarkable guiding precision.
A new special feature is the active tilt error compensation which is integrated for the z-axis drive. This new feature is based on the requirements for microscopy applications. As an option, the TRITOR may be specially prepared for vacuum and/or low temperature applications.
Aside from microscopy, potential applications for this system include: optics and laser tuning, fiber positioning, imaging, cell tracking and scanning (SNOM; AFM).
Controller unit ENV piezo amplifier (E-840-131) with PC-interface and 16bit resolution.
