The series of 1-channel piezo aplifiers 5V10, 12V40, 30DV50 and NV40/1 was designed for controlling of one axis piezo positioning systems.
Depending on the configuration these amplifiers can be equipped with a sensor servo module for controlling actuators with integrated positioning feed back sensor. These actuators a marked by the letter "SG" or "CAP" in the description.
All amplifiers can be controlled by an analog signal.
The series 30DV50, 12V40 and NV 40/1 can be also controlled manually with a potentiometer and also they provide a monitor output with the actuator controlling signal.
The amplifier of the series NV 40/1 are well suited for high performance application. The motion is shown on a display, the memory function allows to store a position and a RS232 interface can be used for PC controlling.
The 30DV50 is the only one of the series of OEM amplifiers for full digital closed loop function with ASI*-function.
The important value of signal-to-noise-ratio, which determines the total resolution of the actuator, is 0.3mV for each amplifier from piezosystem jena.
ASI*= automatic sensor identification (pls. also see chapter d-Drive)
Depending on the configuration these amplifiers can be equipped with a sensor servo module for controlling actuators with integrated positioning feed back sensor. These actuators a marked by the letter "SG" or "CAP" in the description.
All amplifiers can be controlled by an analog signal.
The series 30DV50, 12V40 and NV 40/1 can be also controlled manually with a potentiometer and also they provide a monitor output with the actuator controlling signal.
The amplifier of the series NV 40/1 are well suited for high performance application. The motion is shown on a display, the memory function allows to store a position and a RS232 interface can be used for PC controlling.
The 30DV50 is the only one of the series of OEM amplifiers for full digital closed loop function with ASI*-function.
The important value of signal-to-noise-ratio, which determines the total resolution of the actuator, is 0.3mV for each amplifier from piezosystem jena.
ASI*= automatic sensor identification (pls. also see chapter d-Drive)
